Evercoat Kitty Hair 1Q 100868

How to use

Here's how to use Evercoat Kitty Hair for repairing fiberglass and reinforcing metal: Surface Preparation : Clean the surface thoroughly, removing all dirt, grease, rust, and loose material. Sand the area to create a rough surface for better adhesion. Mixing : Stir the Evercoat Kitty Hair well before use. Mix the required amount of filler with the supplied hardener according to the instructions (typically, a golf ball-sized amount of filler with a pea-sized amount of hardener). Blend thoroughly until you achieve a uniform color. Be sure to mix only what you can use in a few minutes, as the filler begins to harden quickly. Application : Apply the mixed filler onto the prepared surface using a spreader or putty knife. Spread it evenly, ensuring full coverage over the damaged area. You can use fiberglass cloth or mat for additional reinforcement if needed, but it’s not required. Shaping & Sanding : Allow the filler to cure completely (usually within 20-30 minutes). Once dry, sand the area with coarse grit sandpaper to smooth it and shape as needed. Finishing : For a smoother finish, apply a finer body filler like Evercoat Rage® or Metal Glaze® over the repaired area. Sand the area again for a smooth, paint-ready surface. Note : Always follow specific product instructions and safety guidelines provided on the packaging.